Elec Freaks Bluetooth Modem Manuel d'utilisateur télécharger pdf (Page 3)

simply way is: First, set AT+CMODE=1. Make the master module pair with the slave

module. Second, set AT+CMODE=0. Then the master module just can make pair with

that specified slave module.

(3) When PIN34 keeps high level, all commands can be used. Otherwise, only some of

them can be used.

==============================================================

Detailed description of Command

(AT command is case- sensitive, should end up with terminator (“enter” or “\r\n”).)

1. Test

Command Response Parameter

AT OK None

2. Reset

Command Response Parameter

AT+RESET OK None

3. Get the soft version

Command Response Parameter

AT+VERSION?

+VERSION: <Param>

Param: Version number

Example :

at+version?\r\n

+VERSION:2.0-20100601

4. Restore default status

Command Response Parameter

AT+ORGL OK None

The parameter of default status:

1 2 3 4 5 6 7 8 ... 28 29

Pas de commentaire

Elec Freaks Bluetooth Modem Manuel d'utilisateur Page 3