Elec Freaks Bluetooth Modem Manuel d'utilisateur télécharger pdf (Page 10)

Command Response Parameter

AT+BIND=<Param> OK

AT+ BIND?

+ BIND:<Param>

Param----Bluetooth address

needed to be bind

Default address:

00:00:00:00:00:00

Bluetooth address will show as this way: NAP:UAP:LAP(Hexadecimal)

This command is effective only when the module wants to connect to the specified

Bluetooth address.

Example:

The module is at connection mode which connects to specified Bluetooth address,

and the specified address is 12:34:56:ab:cd:ef.

Command and the response show as follow:

AT+BIND=1234, 56, abcdef\r\n

AT+BIND?\r\n

+BIND:1234:56:abcdef

16. Set/Inquire - drive indication of LED and connection status

Command Response Parameter

AT+POLAR=<Param1>,

AT+ BIND?

+ POLAR=<Param1>,

Param1:The value is

0----PI08 outputs low level and turn on

LED

1----PI08 outputs high level and turn on

LED

Param2:The value is

0----PI09 output low level, indicate

successful connection

1----PI09 output high level, and

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 28 29

Pas de commentaire

Elec Freaks Bluetooth Modem Manuel d'utilisateur Page 10